Cellulose Nanocrystals Show Anti-Adherent and Anti-Biofilm Properties against Oral Microorganisms.

Cellulose nanocrystals (CNCs) are cellulose-derived nanomaterials that can be easily obtained, e.g., from vegetable waste produced by circular economies. They show promising antimicrobial activity and an absence of side effects and toxicity. This study investigated the ability of CNCs to reduce microbial adherence and biofilm formation using in vitro microbiological models reproducing the oral environment. Microbial adherence by microbial strains of oral interest, Streptococcus mutans and Candida albicans, was evaluated on the surfaces of salivary pellicle-coated enamel disks in the presence of different aqueous solutions of CNCs. The anti-biofilm activity of the same CNC solutions was tested against S. mutans and an oral microcosm model based on mixed plaque inoculum using a continuous-flow bioreactor. Results showed the excellent anti-adherent activity of the CNCs against the tested strains from the lowest concentration tested (0.032 wt. %, p < 0.001). Such activity was significantly higher against S. mutans than against C. albicans (p < 0.01), suggesting a selective anti-adherent activity against pathogenic strains. At the same time, there was a minimal, albeit significant, anti-biofilm activity (0.5 and 4 wt. % CNC solution for S. mutans and oral microcosm, respectively, p = 0.01). This makes CNCs particularly interesting as anticaries agents, encouraging their use in the oral field.

Natural, biphasic calcium phosphate from fish bones for enamel remineralization and dentin tubules occlusion.

OBJECTIVES: A calcium phosphate extracted from fish bones (CaP-N) was evaluated for enamel remineralization and dentinal tubules occlusion. METHODS: CaP-N was characterized by assessing morphology by SEM, crystallinity by PXRD, and composition by ICP-OES. CaP-N morphology, crystallinity, ion release, and pH changes over time in neutral and acidic solutions were studied. CaP-N was then tested to assess remineralization and dentinal tubules occlusion on demineralized human enamel and dentin specimens (n = 6). Synthetic calcium phosphate in form of stoichiometric hydroxyapatite nanoparticles (CaP-S) and tap water were positive and negative controls, respectively. After treatment (brush every 12 h for 5d and storage in Dulbecco's modified PBS), specimens' morphology and surface composition were assessed (by SEM-EDS), while the viscoelastic behavior was evaluated with microindentation and DMA. RESULTS: CaP-N consisted of rounded microparticles (200 nm - 1 µm) composed of 33 wt% hydroxyapatite and 67 wt% ß-tricalcium phosphate. In acidic solution, CaP-N released calcium and phosphate ions thanks to the preferential ß-tricalcium phosphate phase dissolution. Enamel remineralization was induced by CaP-N comparably to CaP-S, while CaP-N exhibited a superior dentinal tubule occlusion than CaP-S, forming mineral plugs and depositing new nanoparticles onto demineralized collagen. This behavior was attributed to its bigger particle size and increased solubility. DMA depth profiling and SEM showed an excellent interaction between the newly formed mineralized structures and the pristine tissue, particularly at the exposed collagen fibrils. SIGNIFICANCE: CaP-N demonstrated very good remineralizing and occlusive activity in vitro, comparable to CaP-S, thus could be a promising circular economy alternative therapeutic agent for dentistry.

Knowledge and attitudes on oral health of women during pregnancy and their children: an online survey.

BACKGROUND: Life-long healthy behaviors are established during pregnancy and the first years of life. In this cross-sectional survey, new mothers with a high level of schooling living in Northern Italy (Lombardy Region) were interviewed to assess their knowledge and attitudes towards their and child oral health. METHODS: A questionnaire (27 items) was developed to assess socio-demographic factors, knowledge, and attitudes towards maternal and child oral health. The questionnaire was disseminated in perinatal courses, private gynecological clinics, and via social media. Mothers aged ≥18 years, with at least a child aged 0-36 months, with a high school diploma or higher, were included in the survey. RESULTS: A total of 1340 women completed the questionnaire, 1297 of whom had a child aged 0-36 months, 792 lived in Lombardy, and 600 had a high level of education and were finally included. About half of the sample (44.67%) was aged between 31 and 35 years, 76.50% were employed, and the majority had only one child (81.50%). During pregnancy, 28.33% of the sample reported problems with teeth and gums, while only 36.00% visited a dentist. More than 40% of the sample said they were not aware of a possible link between oral health and pregnancy, and 73.17% had not received any advice about their oral health or the future health of their baby's mouth. Less than 20% of women were aware of the increased caries risk associated with prolonged or night-time breastfeeding. Better knowledge/attitude was associated with the age of the child (p < 0.05), the number of children (p < 0.05) and whether the mother had received advice during pregnancy (p < 0.05). CONCLUSIONS: The results of this survey show a lack of dental care during pregnancy, a lack of information about oral health from health professionals during and after pregnancy, and consequently gaps in the knowledge needed to care for the oral health of the woman and her child. There is a need for training in oral health for pregnant women and new mothers, but also a need for behavioural change among health professionals who care for pregnant women.

Effect of open windows on airborne contamination and its topographical distribution in the dental operatory.

Aerosols produced by dental handpieces represent a permanent risk of disease transmission in the dental environment. The current study evaluated the effects of natural ventilation (open windows) on Streptococcus mutans airborne contamination by dental handpieces in simulated clinical conditions. A dental phantom was placed on a dental chair at a standard university dental clinic operatory. An S. mutans suspension was infused into the phantom's mouth while an operator performed standardized dental procedures using low (contra-angle) and high speed (turbine) dental handpieces or an ultrasonic scaler, with windows open or closed. Selective medium Petri dishes were placed in 18 sites of the operatory environment to evaluate contamination topographically. Sites were clustered as: wall, floor, ceiling, dental chair, and cabinet. Contamination was expressed as log10 CFU/cm2 . A linear mixed model analysis was used, nesting the sites within each ventilation and handpiece combination. Open windows significantly reduced contamination. The high-speed handpiece provided the highest contamination, followed by the ultrasonic scaler and the low-speed handpiece. Contamination values were much smaller at the ceiling, and much larger at the chair. Opening windows produced more homogeneous contamination of the operatory compared to closed windows. Natural ventilation during dental procedures decreases contamination and affects its topographical distribution.

Light Transmission Characteristics and Cytotoxicity within A Dental Composite Color Palette.

Modern light-cured, resin-based composites are offered in a wide range of shades and translucencies. This large variation, created by varying the amount and type of pigmentation and opacifiers, is essential to enable an esthetic restoration in each patient situation, but may affect light transmission in the deeper layers during curing. We quantified optical parameters and their real-time variation during curing for a 13-shade composite palette of identical chemical composition and microstructure. Incident irradiance and real-time light transmission through 2 mm thick samples were recorded to calculate absorbance, transmittance, and the kinetic of transmitted irradiance. Data were supplemented by the characterization of cellular toxicity to human gingival fibroblasts up to 3 months. The study highlights a strong dependence of light transmission and its kinetic as a function of shade, with the largest changes occurring within the first second of exposure; the faster changes, the darker and more opaque the material. Transmission differences within progressively darker shades of a pigmentation type (hue) followed a hue-specific, non-linear relationship. Shades with similar transmittance but belonging to different hues were identified, while the corresponding kinetic was identical only up to a transmittance threshold. A slight drop in absorbance was registered with increasing wavelength. None of the shades were cytotoxic.

Chemical and Structural Assessment of New Dental Composites with Graphene Exposed to Staining Agents.

Among the newest trends in dental composites is the use of graphene oxide (GO) nanoparticles to assure better cohesion of the composite and superior properties. Our research used GO to enhance several hydroxyapatite (HA) nanofiller distribution and cohesion in three experimental composites CC, GS, GZ exposed to coffee and red wine staining environments. The presence of silane A-174 on the filler surface was evidenced by FT-IR spectroscopy. Experimental composites were characterized through color stability after 30 days of staining in red wine and coffee, sorption and solubility in distilled water and artificial saliva. Surface properties were measured by optical profilometry and scanning electron microscopy, respectively, and antibacterial properties wer e assessed against Staphylococcus aureus and Escherichia coli. A colour stability test revealed the best results for GS, followed by GZ, with less stability for CC. Topographical and morphological aspects revealed a synergism between GZ sample nanofiller components that conducted to the lower surface roughness, with less in the GS sample. However, surface roughness variation due to the stain was affected less than colour stability at the macroscopic level. Antibacterial testing revealed good effect against Staphylococcus aureus and a moderate effect against Escherichia coli.

TEGDMA-Functionalized Dicalcium Phosphate Dihydrate Resin-Based Composites Prevent Secondary Caries in an In Vitro Biofilm Model.

This study evaluated the efficacy of experimental TEGDMA-functionalized dicalcium phosphate dihydrate (T-DCPD) filler-based resin-based composites (RBC) in preventing caries lesions around the restoration margins (secondary caries, SC). Standardized Class-II cavities were made in sound molars with the cervical margin in dentin. Cavities were filled with a commercial resin-modified glass-ionomer cement (RMGIC) or experimental RBCs containing a bisGMA-TEGDMA resin blend and one of the following inorganic fractions: 60 wt.% Ba glass (RBC-0); 40 wt.% Ba glass and 20 wt.% T-DCPD (RBC-20); or 20 wt.% Ba glass and 40 wt.% T-DCPD (RBC-40). An open-system bioreactor produced Streptococcus mutans biofilm-driven SC. Specimens were scanned using micro-CT to evaluate demineralization depths. Scanning electron microscopy and energy-dispersive X-ray spectroscopy characterized the specimen surfaces, and antimicrobial activity, buffering effect, and ion uptake by the biofilms were also evaluated. ANOVA and Tukey's tests were applied at p < 0.05. RBC-0 and RBC-20 showed SC development in dentin, while RBC-40 and RMGIC significantly reduced the lesion depth at the restoration margin (p < 0.0001). Initial enamel demineralization could be observed only around the RBC-0 and RBC-20 restorations. Direct antibiofilm activity can explain SC reduction by RMGIC, whereas a buffering effect on the acidogenicity of biofilm can explain the behavior of RBC-40. Experimental RBC with CaP-releasing functionalized T-DCPD filler could prevent SC with the same efficacy as F-releasing materials.

Microbiological models for accelerated development of secondary caries in vitro.

OBJECTIVES: The current study aimed to compare the efficacy of two in vitro microbiological models based on open and closed systems designed to obtain secondary caries in an accelerated and reproducible way. METHODS: A conventional resin-based composite (RBC - Majesty ES-2; Kuraray, Japan) and a resin-modified glass-ionomer cement (RMGIC - Ionolux; VOCO, Germany) were used to restore standardized class II cavities (n = 4/tooth, cervical margin in dentin) in 16 human molars. The ability to produce secondary caries with Streptococcus mutans biofilms was tested using either an open-cycle or closed-cycle bioreactor (n = 8 specimens/model). Specimens were scanned before and after the biofilm exposure using micro-CT (Skyscan 1176, 9 µm resolution, 80 kV, 300 mA). Image reconstruction was performed, and demineralization depths (µm) were evaluated at the restoration margins and a distance of 1.0 mm. RESULTS: Dentin demineralization could be observed in all specimens, and enamel demineralization in 50% of the specimens. The open system bioreactor produced lesions with significantly higher overall demineralization depths (p < .001). However, demineralization depths at a 1.0 mm distance from the restoration margins showed no difference between open and closed systems or materials. In the open system, significantly lower demineralization depths were observed in proximity to RMGIC than RBC (p < .001), which was not significantly different in the closed system (p = .382). CONCLUSIONS: Both systems produced in vitro secondary caries in an accelerated way. However, the open-cycle bioreactor system confirmed the caries-protective activity exerted by the RMGIC material in contrast to the RBC, better simulating materials' clinical behavior. CLINICAL SIGNIFICANCE: The possibility of obtaining accelerated and reproducible secondary caries development in vitro is fundamental in testing the behavior of conventional and yet-to-come restorative dental materials. Such systems can provide faster outcomes regarding the performance of dental restorative materials compared to clinical studies, notwithstanding the importance of the latter.

Microstructure and Mechanical Behavior of Modern Universal-Chromatic and Bulk-Fill Resin-Based Composites Developed to Simplify Dental Restorative Procedures.

One of the recent trends in the development of resin-based composites (RBCs) focuses on universal coloring to avoid time-consuming color matching and RBC layering for a clinically appropriate esthetic impact. We evaluated an experimental material for posterior restorations combining universal coloring with the possibility of bulk-fill placement. Clinically established materials were analyzed as a reference, including a bulk-fill and a universal chromatic RBC. Microstructural features were described using scanning electron microscopy and related to macroscopic and microscopic mechanical behavior. Standards to be met before market launch were supplemented by fractography, Weibull analysis, and aging behavior assessment. Quasi-static and viscoelastic behavior were evaluated on a microscopic scale, incorporating a large number of parameters and increasingly aggressive immersion media. All materials complied with the standard requirements even after aging. The latter had little impact on the measured parameters, except for strength. Strength, modulus of elasticity, and hardness parameters on the one hand and damping behavior on the other were mutually exclusive. Despite considerable differences in the microstructure and type of filler, an increased filler amount remained critical for better mechanical properties. The lower proportion of inorganic fillers was directly transferred to the elastic modulus values, which, in turn, restricts the experimental material in its clinical applications to smaller occlusal fillings.

Physical-chemical and microbiological performances of graphene-doped PMMA for CAD/CAM applications before and after accelerated aging protocols.

OBJECTIVES: Innovative, nanotechnologies-featuring dental materials for CAD/CAM applications are becoming available. However, the interaction with the oral environment poses critical challenges to their longevity. The present study evaluated specific physical-chemical properties and antimicrobial potential of a CAD/CAM graphene-doped resin before and after accelerated aging protocols. METHODS: Graphene nanofibers (GNF)-doped (<50 ppm) PMMA (GPMMA) and control PMMA CAD/CAM discs were used. Specimens underwent aging procedures of their bulk (thermo- and load-cycling) and surface (24 h-immersion in absolute ethanol), then they were tested for flexural strength, ultimate tensile strength, sorption/solubility, and methyl-methacrylate elution. Surface characterization included x-ray diffraction, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, surface roughness, microhardness, and scanning electron microscopy (SEM). Adherence of Streptococcus mutans and Candida albicans, and biofilm formation (continuous-flow bioreactor) by the same strains and an artificial oral microcosm were investigated. RESULTS: GNF-doping improved the physical-chemical bulk properties of the PMMA resin. Surface aging reduced microhardness and increased the roughness of both test and control materials. Surfaces displayed signs of swelling and degradation at SEM. Microbiological data of non-aged surfaces showed that GNF-doping significantly reduced biofilm formation by all tested strains despite having no impact on microbial adherence. After aging, microbial adherence was higher on GPMMA surfaces, while biofilm formation was not promoted. SIGNIFICANCE: GNF-doping improved the material's performance and influenced its antimicrobial potential. This strategy seems a valuable option to overcome the effects of surface degradation induced by aging on the antimicrobial potential of PMMA resin.

Assessment of the remineralisation induced by contemporary ion-releasing materials in mineral-depleted dentine.

OBJECTIVES: Evaluate the ability of current ion-releasing materials to remineralise bacteria-driven artificial caries lesions. MATERIALS AND METHODS: Standardised class I cavities were obtained in 60 extracted human molars. Specimens underwent a microbiological cariogenic protocol (28 days) to generate artificial caries lesions and then were randomly divided into four restorative groups: adhesive + composite (negative control); glass ionomer cement (GIC); calcium silicate cement (MTA); and resin-modified calcium silicate cement (RMTA). Microhardness analysis (ΔKHN) was performed on 40 specimens (10/group, t = 30 days, 45 days, 60 days in artificial saliva, AS). Micro-CT scans were acquired (3/group, t = 0 days, 30 days, and 90 days in AS). Confocal microscopy was employed for interfacial ultra-morphology analysis (2/group, t = 0 days and 60 days in AS). Additional specimens were prepared and processed for scanning electron microscopy (SEM) and FTIR (n = 3/group + control) to analyse the ability of the tested materials to induce apatite formation on totally demineralised dentine discs (60 days in AS). Statistical analyses were performed with a significance level of 5%. RESULTS: Adhesive + composite specimens showed the lowest ΔKHN values and the presence of gaps at the interface when assessed through micro-CT even after storage in AS. Conversely, all the tested ion-releasing materials presented an increase in ΔKHN after storage (p < 0.05), while MTA best reduced the demineralised artificial carious lesions gap at the interface. MTA and RMTA also showed apatite deposition on totally demineralised dentine surfaces (SEM and FTIR). CONCLUSIONS: All tested ion-releasing materials expressed mineral precipitation in demineralised dentine. Additionally, calcium silicate-based materials induced apatite precipitation and hardness recovery of artificial carious dentine lesions over time. CLINICAL RELEVANCE: Current ion-releasing materials can induce remineralisation of carious dentine. MTA shows enhanced ability of nucleation/precipitation of hydroxyapatite compared to RMTA and GIC, which may be more appropriate to recover severe mineral-depleted dentine.

Prognostic Factors and Primary Healing on Root Perforation Repaired with MTA: A 14-year Longitudinal Study.

INTRODUCTION: Few data are available on the long-term efficacy of mineral trioxide aggregate (MTA) in treating root canal perforations. This prospective cohort study builds on a previously reported trial to determine the outcome for teeth with root perforations treated with orthograde MTA after longer follow-up and identify potential prognostic factors. METHODS: A prospective cohort study was performed, enrolling (1999-2009) patients with a single dental perforation treated with MTA. Preoperative, intraoperative, and postoperative information was evaluated, and the outcomes were dichotomized as healed or nonhealing. Patients were followed up yearly until 2018 for a maximum of 17 years after treatment, with controls carried out until 14 years. Clinical and radiographic outcomes were evaluated using standardized follow-up protocols. RESULTS: Of the 124 entrolled patients (median age = 36.5 years, 53.2% male), 115 were healed at the first (n = 110, 89%) or second (n = 5, 4%) annual posttreatment checkup, while 9 subjects (7%, 4 females, 18-65 years old) did not heal. Characteristics significantly associated with nonhealing were gender, positive probing, size, and perforation site. Perforations recurred in 48 teeth during the follow-up with the estimated probability of reversal at 5, 10, and 14 years of 6% (95% confidence interval [CI], 2%-10%), 30% (95% CI, 20%-38%), and 62% (95% CI, 46%-73%), respectively. Positive probing had a higher reversal risk (hazard ratio = 3.3, P ≤ .001), and perforations >3 mm were more likely to have a reversal (hazard ratio = 4.1, P < .001). CONCLUSIONS: The risk of reversal for healed MTA-treated root canal perforations, initially relatively low, vastly increases over time.

Airborne contamination of the dental operatory during activities performed with open or closed windows.

PURPOSE: To quantify the biological contamination of a dental operatory environment using a biological tracer. METHODS: A Streptococcus mutans suspension was infused into the mouth of a phantom, and an operator performed standardized dental procedures using an air turbine, a contra-angle handpiece, or an ultrasonic scaler either with windows open or closed. The presence of the tracer was measured by placing Petri dishes with a selective medium at 18 sites on the dental unit and 38 sites in the surrounding operatory environment. RESULTS: The contamination was drastically reduced when windows were opened, no matter which handpiece was used. Air turbine spread significantly higher contamination compared to contra-angle and scaler. All tested instruments spread the tracer over the entire dental unit and the surrounding environment, including the walls and ceiling; however, higher contamination levels were detected on the dental unit compared to the operatory surfaces. Opening windows during dental operative procedures greatly reduced contamination levels for all handpieces and can be recommended for reducing airborne contamination levels. CLINICAL SIGNIFICANCE: The significant levels of airborne contamination produced when operating dental handpieces can be significantly reduced by natural ventilation, i.e., simply opening the windows.

Dental tissue remineralization by bioactive calcium phosphate nanoparticles formulations.

Recent health care products are based on formulations claimed to provide enamel remineralization and dentinal tubules occlusion through calcium-phosphate bioactive nanocompounds (ion-doped hydroxyapatite and precursor, amorphous calcium phosphate nanoparticles). This study aimed to characterize, test, and compare for the first time the structure and performance of a representative, market-available sample of remineralizing toothpastes and topical mousses. Formulations were characterized to determine their composition and investigate the presence of bioactive compounds and doping elements. A conventional fluoride-containing toothpaste was used as reference. The enamel remineralization and efficacy of dentinal tubules occlusion by tested formulations were investigated ex vivo on human hard tissues. All formulations containing Ca-P bioactive nanocompounds showed remineralizing ability by epitaxial growth of a layer showing the morphology and composition of human hydroxyapatite. Such layers also embedded nanosilica clusters. The presence of doping elements or casein phosphopeptide seemed essential to allow such performances, especially when hydroxyapatite and amorphous calcium phosphate compounds were doped with small amounts of CO32-, F-, Mg2+, and Sr2+. Topical mousse formulations showed a higher tubules occlusion capability than toothpastes, independently from their composition. Therefore, all tested formulations could be useful in restoring tooth structures in a biomimetic way, contrasting dental demineralization processes leading to caries.

Characterization of universal chromatic resin-based composites in terms of cell toxicity and viscoelastic behavior.

OBJECTIVES: A current trend to simplify dental restorative procedures is toward using universal chromatic light-cured resin-based composites (RBCs) designed to adapt esthetically to various clinical situations. This study offers a comparative characterization of the mechanical and cytotoxic behavior of such materials that use different techniques to adjust their optical properties (e.g., structural color instead of pigment addition), have different filler systems but are based on a comparable organic matrix. METHODS: The structural appearance of the filler systems was assessed by scanning electron microscopy. Various quasi-static and viscoelastic parameters were evaluated at clinically relevant frequencies (0.5-5 Hz) using an instrumented indentation test with a Dynamic Mechanical Analysis (DMA) module. Cytotoxicity on human gingival fibroblasts (HGF-1), when exposed to eluates from tested RBCs specimens (up to one month), was assessed using a WST-1 colorimetric proliferation assay. Multifactor analysis of variance was applied to compare the parameters of interest (Martens, Vickers, and indentation hardness; elastic and total indentation work; creep, indentation depth; storage, loss, and indentation moduli; loss factor; cell viability) between analyzed RBCs, loading frequencies, and eluate age. RESULTS: Structural particularities of the filler systems are directly reflected in the mechanical behavior of the analyzed materials. Changes in the filler system, necessary to achieve structural color, generally resulted in lower mechanical properties but a better ability to absorb shock. In contrast, the cytotoxicity was comparable. SIGNIFICANCE: Based on the performed characterization, universal chromatic RBCs fits in the conventional RBCs class to expect comparable clinical behavior.

Influence of Low-pH Beverages on the Two-Body Wear of CAD/CAM Monolithic Materials.

The aim of this in vitro study is to evaluate the effect of different acidic media on volumetric wear and surface roughness of CAD/CAM monolithic materials. Forty-eight rectangular specimens were prepared using different CAD/CAM monolithic materials: nanohybrid composite (Grandio Blocks, Voco), resin-based composite (Cerasmart, GC), lithium disilicate (E-Max, Ivoclar), and high-translucency zirconia (Katana STML, Kuraray Noritake). After storage in distilled water at 37 °C for two days, the specimens were tested using a chewing machine with a stainless-steel ball as an antagonist (49N loads, 250,000 cycles). Testing was performed using distilled water, Coca-Cola, and Red Bull as abrasive media. Wear and surface roughness analyses of the CAD/CAM materials were performed using a 3D profilometer and analyzed with two-way analysis of variance and post hoc pairwise comparison procedures. Worn surfaces were examined using scanning electron microscopy. Resin-based materials suffered higher volumetric wear than ceramics (p = 0.00001). Water induced significantly less volumetric wear than the other tested solutions (p = 0.0014), independent of the material tested. High-translucency zirconia showed less surface roughness than all the other materials tested. The selection of monolithic CAD/CAM materials to restore worn dentition due to erosive processes could impact restorative therapy stability over time. Resin-based materials seem to be more influenced by the acidic environment when subjected to a two-body wear test.

Influence of Curing Time on the Microbiological Behavior of Bulk-Fill Nanohybrid Resin Composites.

This in vitro study aimed to evaluate the influence of curing time on surface characteristics and microbiological behavior of three bulk-fill resin-based composites (RBCs). Materials were light-cured for either 10 s or 80 s, then finished using a standard clinical procedure. They were characterized by surface morphology (SEM), surface elemental composition (EDS), surface roughness (SR), and surface free energy (SFE). Microbiological behavior was assessed as S. mutans adherence (2 h) and biofilm formation (24 h) using a continuous-flow bioreactor. Statistical analysis included a two-way ANOVA and Tukey's test (p < 0.05). Materials differed substantially as filler shape, dimension, elemental composition and resin matrix composition. Significant differences between materials were found for SR, SFE, and microbiological behavior. Such differences were less pronounced or disappeared after prolonged photocuring. The latter yielded significantly lower adherence and biofilm formation on all tested materials, similar to conventional RBCs. Improved photoinitiators and UDMA-based resin matrix composition may explain these results. No correlation between surface characteristics and microbiological behavior can explain the similar microbiological behavior of bulk-fill materials after prolonged photocuring. This different performance of bulk-fill materials compared with conventional RBCs, where surface characteristics, especially surface chemistry, influence microbiological behavior, may have important implications for secondary caries occurrence and restoration longevity.

Elabela Protects Spontaneously Hypertensive Rats From Hypertension and Cardiorenal Dysfunctions Exacerbated by Dietary High-Salt Intake.

Objectives: Arterial hypertension, when exacerbated by excessive dietary salt intake, worsens the morbidity and mortality rates associated with cardiovascular and renal diseases. Stimulation of the apelinergic system appears to protect against several circulatory system diseases, but it remains unknown if such beneficial effects are conserved in severe hypertension. Therefore, we aimed at determining whether continuous infusion of apelinergic ligands (i.e., Apelin-13 and Elabela) exerted cardiorenal protective effects in spontaneously hypertensive (SHR) rats receiving high-salt diet. Methods: A combination of echocardiography, binding assay, histology, and biochemical approaches were used to investigate the cardiovascular and renal effects of Apelin-13 or Elabela infusion over 6 weeks in SHR fed with normal-salt or high-salt chow. Results: High-salt intake upregulated the cardiac and renal expression of APJ receptor in SHR. Importantly, Elabela was more effective than Apelin-13 in reducing high blood pressure, cardiovascular and renal dysfunctions, fibrosis and hypertrophy in high-salt fed SHR. Unlike Apelin-13, the beneficial effects of Elabela were associated with a counter-regulatory role of the ACE/ACE2/neprilysin axis of the renin-angiotensin-aldosterone system (RAAS) in heart and kidneys of salt-loaded SHR. Interestingly, Elabela also displayed higher affinity for APJ in the presence of high salt concentration and better resistance to RAAS enzymes known to cleave Apelin-13. Conclusion: These findings highlight the protective action of the apelinergic system against salt-induced severe hypertension and cardiorenal failure. As compared with Apelin-13, Elabela displays superior pharmacodynamic and pharmacokinetic properties that warrant further investigation of its therapeutic use in cardiovascular and kidney diseases.

Efficacy of personal protective equipment against coronavirus transmission via dental handpieces.

BACKGROUND: This laboratory study was done to evaluate the efficacy of personal protective equipment (PPE) and high-volume evacuation (HVE) against the spread of human coronavirus type 229E (HCoV-229E) during a standard dental procedure. METHODS: Patient and operator manikins were used to recreate a dental setting inside a custom-built class III cabinet-like chamber. The mouth of the patient manikin was inoculated with an HCoV-229E suspension, the viral load of which was similar to that of asymptomatic people infected with severe acute respiratory syndrome coronavirus 2. The dental procedure was performed with an air turbine handpiece and HVE for 10 seconds. The efficacy of surgical masks, N95 (filtering facepiece class 2) and filtering facepiece class 3 respirators, and face shields was tested via quantitative real-time polymerase chain reaction. RESULTS: The wide surface on which the inoculum was spread caused low contamination. Over the external surfaces of masks and respirators, when a face shield was not worn, viral loads ranged from 1.2 through 1.4 log10 mean gene copies per cm2. When the shield was worn, viral loads dropped below the detection limit (< 0.317 log10 gene copies/cm2) for all PPE. On the operator's forehead, viral loads were 0.6 through 0.8 log10 gene copies/cm2. Inside the operator manikin's mouth, viral loads were under the detection limit when using any PPE, with or without the shield. HVE did not significantly change viral loads. CONCLUSIONS: All PPE combinations significantly reduced viral loads in the operator manikin's mouth to below the detection limit, but HVE did not decrease viral contamination. PRACTICAL IMPLICATIONS: Although caution is suggested when removing and disposing of PPE to avoid self-contamination, the combination of PPE and face shields drastically decreases the risk of transmitting human coronavirus during aerosol-generating dental procedures.